|
Our
INDUSTRIAL DEPARTMENT
is Geared to Your Process Needs
 Our patented pre –engineered boiler blowdown systems are for blowdown heat recovery and conductivity control of high pressure boilers of 100 to
1000 HP. The system recovers energy from surface blowdown, while controlling the boiler water conductivity. It is a pre-piped and pre-wired system with stainless steel heat exchanger(s), conductivity
control, water meter and BTU recovery meter requires only minor piping and 115 volt power connections.
Controlled Surface Blowdown is the most effective method of eliminating dissolved solids from any
steam boiler system. However, this also results in a constant and costly heat loss, unless a blowdown heat recovery system is used.
The DLS10000 series Blowdown Heat Recovery System adjust automatically
to changing system demands, and recover up to 90% of the heat normally lost during boiler surface blowdown operation.
Blowdown/Heat Recovery systems will usually result in a payback in a few short months from fuel savings alone.
Energy savings go right to the bottom line – Did you realize that if your company makes 2% net profit, saving $10,000 in energy the same as
increasing sales $500,000 per year.
The DLS 10000 series Packaged Blowdown Heat Recovery System provides several features not found in other units:
- It automatically controls the surface blowdown to maintain the desired
level of total dissolved solids (TDS) in the boiler, reducing the amount of blowdown to a minimum.
- It recovers the heat from the high temperature blowdown, and transfers it to the incoming cold make-up water, maximizing boiler efficiency.
- The conductivity controller controls the actual boiler conductivity ( TDS )
level, keeping blowdown to the required minimum and reduces chemical costs
- The BTU system records the actual energy saved and the amount of make-up water used. Invaluable information for the boiler operator and
plant engineer
- The Stainless Steel blowdown heat exchangers are uniquely designed to handle the blowdown and make up water. The unique spiral plate
design provides U Factors as high as 1000 BTU/SqFt/Degree, and maintains high fluid velocities preventing scaling and fouling.
Significant Fuel Savings for Any Size Boiler: Transfers the blowdown heat to the make-up, thereby decreasing fuel costs.
View the US Department of Energy Report
for details
(Adobe Acrobat Reader required)
|
